FCT ’s & GSM Gateways and has enabled customers to save 100’s of thousand pounds in call costs.
All calls
established from a PBX to GSM networks are routed through
an FCT and expensive calls over PSTN to GSM networks
are avoided. Thanks to the powerful and efficient LCR
(Least Cost Router) the FCT always selects the optimum route for
any call. The calls are routed according to prefixes of
GSM providers, Using the FREE MINUTES
on SIM cards etc.
FCT’s now range from low.cost intelligent analogue devices (sometimes still referred to
by Nokia’s trade name of “Premicells”) through to VoIP and 3G corporate
solutions.
Mobility Extension is our first GSM based product that has
diversified from the
traditional Fixed Cellular Terminal although it still utilises
FCT core expertise in
landline to mobile technology.
Analogue Fixed Cellular Terminals
provide a flexible and cost efficient connection between
telephone systems and GSM mobile networks. They are
compatible with any PBX system or analogue phones. You
can use them for cost saving, Internet back-up or to integrate
a mobile phone into the telephone system. We have analogue
Fixed Cellular Terminals with between 1 - 8 GSM channels.
BRI Enterprise - ISDN2 Dial-Thru FCT
The 2N ISDN BRI Enterprise GSM
gateway provides a cost-effective solution. It
is intended for small and medium size companies with
a high proportion of calls to and from GSM networks using
ISDN2 circuits.
Cost Saving Effect:
BRI Enterprise FCT is predominantly a cost saving
device. All calls established from a PBX to GSM
networks are routed through this FCT and expensive
calls over PSTN to GSM networks are avoided. Thanks to
the powerful and efficient LCR (Least Cost Router) the FCT
always selects the optimum route for any call.
The calls are routed according to prefixes of GSM providers,
free minutes on SIM cards etc.
BRI Enterprise incorporates Dial-Thru technology.
As the gateway consists of 2 BRI ISDN ports (1 x NT
/ 1 x TE), it can be connected between the
PSTN and your PBX - all this without the need to
provide an additional BRI ISDN connection or
re-program the PBX.
The BRI Enterprise GSM gateway provides easy remote
management and configuration possibilities thanks to optional
integrated Ethernet interface. A USB 1.1 Interface port is used in this
gateway instead of a traditional RS232 as it is more suitable
for communication with up-to-date personal computers.
Features:
Up to 30 simultaneous calls to mobile
phones.
The ideal cost saving solution for Call Centres, large
organisations with a high call traffic to GSM networks
and corporate head offices with a VoIP network linking remote
sites.
These Fixed Cellular Terminal converts fixed-to-mobile or
mobile-to-fixed calls into much cheaper mobile-to-mobile
calls. Thanks to the sophisticated Least Cost Router (LCR), all
calls are always routed in the cheapest possible way.
Two ISDN PRI interfaces allow you to
install the device between the PBX and PSTN. This eliminates
the need to install an additional PRI port in
your PBX. Moreover, you do not need reconfigure the
PBX to route mobile calls to the FCT. All calls go through the
FCT & it intercepts calls to mobiles and allows standard
PSTN calls to pass through.
Features:
